These speed posts from Kila are the best thing since pull pins. No more twiddling away your time with an allen wrench to change your battery or adjust your trigger. Just pop your grip off by hand, do your work, and then press your grips back in to place. Genius I say. Pure genius!

Video Transcript: Today we're looking at the Kila Pop-Lock Speed Posts. These are grip screws without the allen wrench head. They just have a rounded off head instead. These let you replace the screws that hold you grip on and instead of having to use an allen wrench to take your grips off they can just pop off around the Pop-Lock head giving you tool-less access to your paintball gun. I haven't installed these before so we're going to put this paintball mod on a US Army Carver One paintball gun with E-Grip (T106402). Take out the original screws. Kila says these can be installed without tools. I hope so because there's no where to put a tool on them! They're only going to work if they're the right threads and they are. There we go, I've got one started now. The threads are self locking so you can adjust how far they're screwed in and that changes the height of the ball on the head making the grips easier or harder to get off and an and more or less snug to the gun. Okay, I've got the two pop locks installed. The grip should just snap in place. It's nice and secure. It's not going to pop off during play. They have a nice rounded head on the pop lock so they won't get dirty. When you need access just take the grip right off, put the battery in, and snap your grip right back in to place. I felt the top snap better than the bottom so I'll take the bottom post out just a bit. That felt better. Nice and tight. Good to go. Kila Pop-Locks with tool-less access to your grips to change your batteries or make whatever other adjustments you need to inside your grips. Additional Notes: The package comes with 4 screws. If your main goal here is just to gain battery access then you only need 2 of them for one side of the grip. So you could easily stretch this package to a second gun.

• Self-locking threads let you adjust the height of the head allowing for firmness adjustments.